▂▂
PRODUCT INFO.
(CLICK THE PICTURE FOR MORE INFO.)
Item
Insulation Resistance
Specification
The initial minimum is 1000 MΩ. The minimum is 500 MΩ after the test.
Condition
DC200 V ±10V, Power on adjacent pins for 1 minute.
Item
Withstand Voltage
Specification
No short circuit, attenuation, spark or other defects.
Condition
AC500 V. Power on for 1 minute, lower than 1 mA leakage current.
Item
Contact Resistance
Specification
Initial 150mΩ max. The impedance change after the test is less than 30mΩ
Condition
It was measured at 100 mA current and 20mV voltage.
Item
Insertion force
Specification
Maximum 20 N
Condition
Insertion force with card and without card.
Item
Withdrawal Force
Specification
Plug 2000 times, 3 N/min
Condition
Withdrawal force with card and without card.
Item
Normal Force of Terminal
Specification
40gf Min/PIN
Condition
Press down to 0.10mm from the plastic surface.
Item
Lifetime
Specification
There is no obvious damage, and the pulling force should meet the specifications.
Condition
2000 times; Speed: 10 times/min.
